-
24H MOBILE WORKSHOP
(across the entire national territory) - +39 340 4881139
-
-
-
-


DH15
Features
• Excavator-mounted, hydraulic, impact-type piling hammer.
• Utilised to drive load-bearing tubular steel piles, H-piles and timber piles or assisting in sheet pile driving even in the most difficult soil conditions. Also used in conjunction with side grip pile drivers to complete a pile installation after reaching refusal or when load testing is required.
• The excavator mounting incorporates a 0.7 m leader. The piling hammer can also be mounted on an excavator-mounted leader mast.
• Standard mounting with pin adapter (tilt +/-15º, no rotation). Available with bolt-on-plate mounted rotation device (tilt +/-15º, rotation +/- 60º).
• Available with drive caps for a range of different pile sections.
• Controlled with the MOVAX Control System (MCS™); MCS Lite, MCS Pro or MCS Pro+auto.
• Reporting and documentation of piling works with M-logbook™ (optional, requires MCS Pro or MCS Pro+Auto).
Technical data
| Excavator mounted | Excavator leader-mounted | Piling rig mounted | Crane mounted | ||
| Total weight (excl. adapter) | - | - | - | - | - |
| with tilt device | kg | 3500 | 2800 | 2800 | 2800 |
| with tilt+rotation device | kg | 3800 | N/A | N/A | N/A |
| Ram weight | kg | 1360 | 1360 | 1360 | 1360 |
| Blows | 1/min | 0-100 | 0-100 | 0-100 | 0-100 |
| Impact energy | kNm | 0-15 | 0-15 | 0-15 | 0-15 |
| Drop height | m | 0-1,2 | 0-1,2 | 0-1,2 | 0-1,2 |
| Pressure relief | bar | 350 | 350 | 350 | 350 |
| Operating pressure | bar | 150 | 150 | 150 | 150 |
| Oil flow rate | l/min | 120 | 120 | 120 | 120 |
| Tilt angle | ° | +/-15 | N/A | N/A | N/A |
| Rotation angle | ° | +/- 60 | N/A | N/A | N/A |
| Total height | mm | 3850 | 3850 | 4000 | 4000 |
| Frame width | mm | 500 | 500 | 500 | 500 |
| Transport width | mm | 1200 | 1200 | 1200 | 1200 |
| Transport depth | mm | 1870 | 1870 | 1870 | 1870 |
| Excavator class | - | 23-50 ton | 30-50 ton | - | - |
| Hole depth | - | - | - | - | - |
| Drill speed range, min | - | - | - | - | - |
| Drill speed range, max | - | - | - | - | - |
| Side tilt angle | - | - | - | - | - |
| Torque | - | - | - | - | - |
| Extraction force | - | - | - | - | - |
