-
24H MOBILE WORKSHOP
(across the entire national territory) - +39 340 4881139
-
-
-
-


DH25
Features
• Excavator-mounted, hydraulic, impact-type piling hammer.
• Utilised to drive load-bearing tubular steel piles, H-piles and timber piles or assiting in sheet pile driving even in the most difficult soil conditions. Also used in conjunction with side grip pile drivers to complete a pile installation after reaching refusal or when load testing is required.
• The excavator mounting incorporates a 1.3 m leader. The piling hammer can also be mounted on an excavator-mounted leader mast.
• Standard mounting with pin adapter (tilt +/-15º, no rotation). Available with bolt-on-plate mounted rotation device (tilt +/-15º, rotation +/- 60º).
• Available with drive caps for a range of different pile sections.
• Controlled with the MOVAX Control System (MCS™); MCS Lite, MCS Pro or MCS Pro+auto.
• Reporting and documentation of piling works with M-logbook™ (optional, requires MCS Pro or MCS Pro+auto).
Technical data
| Excavator mounted | Excavator leader-mounted | Piling rig mounted | Crane mounted | ||
| Total weight (excl. adapter) | - | - | - | - | - |
| with tilt device | kg | 4400 | 3700 | 3700 | 3700 |
| with tilt+rotation device | kg | 4700 | N/A | N/A | N/A |
| Ram weight | kg | 2060 | 2060 | 2060 | 2060 |
| Blows | 1/min | 0-100 | 0-100 | 0-100 | 0-100 |
| Impact energy | kNm | 0-25 | 0-25 | 0-25 | 0-25 |
| Drop height | m | 0-1,2 | 0-1,2 | 0-1,2 | 0-1,2 |
| Pressure relief | bar | 350 | 350 | 350 | 350 |
| Operating pressure | bar | 200 | 200 | 200 | 200 |
| Oil flow rate | l/min | 120 | 120 | 120 | 120 |
| Tilt angle | ° | +/- 15 | N/A | N/A | N/A |
| Rotation angle | ° | +/- 60 | N/A | N/A | N/A |
| Total height | mm | 4460 | 4460 | 4610 | 4610 |
| Frame width | mm | 500 | 500 | 500 | 500 |
| Transport width | mm | 1200 | 1200 | 1200 | 1200 |
| Transport depth | mm | 1870 | 1870 | 1870 | 1870 |
| Excavator class | 30-50 ton | 35–50 ton | - | - | |
| Hole depth | - | - | - | - | - |
| Drill speed range, min | - | - | - | - | - |
| Drill speed range, max | - | - | - | - | - |
| Side tilt angle | - | - | - | - | - |
| Torque | - | - | - | - | - |
| Extraction force | - | - | - | - | - |
